Flat exterior complements contemporary architecture
EN
Architectural Roofing Product
33 mm Flat Insulated Aluminum Panel
A clean flat profile for contemporary architectural projects
A slim, flat insulated aluminum panel for contemporary roofs, ceilings, canopies, and exterior surfaces that need a clean visual line with practical thermal and acoustic separation.
4.75 / 52 product reviewsReview specifications- Overall depth
- 33 mm
- Effective width
- 1,000 mm
- Overall width
- 1,025 mm
- Fire rating
- B1
Applications
Where 33 mm Flat Insulated Aluminum Panel fits
The flat profile provides 1,000 mm effective coverage for efficient installation across large surfaces. Its low-profile construction is suited to lightweight architectural applications where a ribbed roof appearance is not preferred.
- Commercial building roofs
- Modern villas and sunrooms
- Residential outbuildings
- Parking canopies and covered walkways
Compare appearance and the complete drainage arrangement, not simply whether a panel looks flat.
Flat vs Profiled Insulated Aluminum Panels
Product specifications
Dimensions, materials and finish
Specifications for 33 mm Flat Insulated Aluminum Panel. Confirm the aluminum skin configuration, color, panel length and connection details before ordering.
- Overall depth
- 33 mm
- Effective width
- 1,000 mm
- Overall width
- 1,025 mm
- Aluminum skins
- 3xxx-series aluminum skins
- Insulation core
- Polyurethane insulation made with BASF raw materials
- Fire rating
- B1
- Surface finish
- HDP high-durability polyester coating
- Coating properties
- Good UV resistance and color retention
- Catalogue aluminum thickness
- Top and bottom aluminum skin thicknesses are customizable
- Custom aluminum skin thickness
- 0.3-1.2 mm
- Catalogue colors
- Gray
- Custom colors
- RAL color codes or customer-supplied physical color samples
- Panel length
- Cut to project requirements, subject to handling, loading, and transport feasibility
Custom colors, lengths and aluminum skin thicknesses are available. Thickness values in parentheses are reproduced as listed in the catalogue; confirm the required configuration with your quotation.
Buyer benefits
Performance that matters in roof selection
1,000 mm effective coverage supports efficient installation
Slim 33 mm profile suits lightweight roof and ceiling uses
Corrosion-resistant skins are designed for exterior exposure
Customization and ordering
Commercial information for procurement planning
No generic price is published because specifications, quantity, packing, destination, and trade terms change the final quotation.
- MOQ and samples
- 500 linear meters per product; small-quantity samples are available.
- Lead time
- Within 3 working days for samples; typically 7-15 working days for bulk orders.
- Trade terms
- EXW is preferred; FOB is negotiable.
Quality documentation
Review quality assurance Reports and technical documents available on request
Complete test reports and additional technical documents are available upon request. The complete five-page B1 fire-performance report is also displayed inline on the homepage.
Related roofing products
Compare the remaining panel profiles
45 mm / 950 mm effective width
45 mm × 950 mm Large-Format Panel
Balanced insulation and rigidity for versatile roofing projects
View product
65 mm / 950 mm effective width
65 mm × 950 mm Large-Format Panel
Enhanced insulation for demanding roofing applications
View product
35 mm / 333 mm effective width
35 mm × 333 mm Modular Panel
Compact modular coverage for flexible installation
View productRoofing accessories for project coordination
Coordinate ridges, flashings, trims, fixings and drainage with 33 mm Flat Insulated Aluminum Panel. Dimensions and compatibility must be confirmed against the selected panel profile and project drawings. Not every accessory is required for every installation.
Ridges & connecting joints
4
Fixed Ridge Cap
Maximum length: 1.9 m
Adjustable-Angle Universal Ridge Cap
Maximum length: 6 m
Three-Way Roof Ridge Junction
Dimensions to suit the project
Straight Panel Connector
Dimensions to suit the project
End caps, wall flashings & joints
3
Wall Abutment Flashing
Maximum length: 1.9 m
Panel End Cap
Maximum size: 95 cm
Panel Connector
Dimensions to suit the project
Starter trims, edges & fixings
4
Universal Edge / Starter Trim
Maximum length: 2 m
Edge Trim
Dimensions to suit the project
Starter Trim for 950 mm Panels
For 950 mm large-format panels
For the 45 mm and 65 mm large-format panels only. Request a matching starter detail for this panel.
Special Sealing Screw
Specification to suit the project
Gutters & corner fittings
5
Gutter
Maximum length: 6 m
90° Internal Gutter Corner
Angle: 90°
90° External Gutter Corner
Angle: 90°
Gutter Connector
Dimensions to suit the project
Gutter End Cap
Dimensions to suit the project
Downpipes & connecting fittings
5
Aluminum Downpipe
Maximum length: 6 m
Downpipe Elbow
Specification to suit the project
Downpipe Adapter
Specification to suit the project
Downpipe Starter Fitting
Specification to suit the project
Downpipe Bracket
Specification to suit the project
Customer project feedback
Reviews of the 33 mm Flat Insulated Aluminum Panel
Individual customer experiences, shared with permission. Reported results relate to specific projects, not independent performance tests or universal product guarantees. Roof slope, drainage, structural spans, and local approvals require project-specific technical confirmation.
33 mm Flat Insulated Aluminum Panel
GMiSU’s 33mm flat insulated panels are the best fit for our 4-season sunroom extensions. The sleek, modern flat finish gives a minimalist architectural aesthetic that our high-end residential clients love. The B1 fire rating report made local municipal permitting effortless. Sample turnaround within 3 days and smooth customs clearance. Highly recommended supplier!
33 mm Flat Insulated Aluminum Panel
Precision engineering at its best. The interlocking tolerances on GMiSU 33mm flat roof panels are spot on, ensuring 100% watertight performance on zero-slope modern patio covers. The customized cut-to-length service saved our installers countless hours of on-site fabrication. German standards met at competitive factory-direct pricing.
Related Technical Guides
Questions about 33 mm Flat Insulated Aluminum Panel
What is the minimum order quantity?
The MOQ is 500 linear meters per product. Small-quantity samples can be ordered before bulk production, while final bulk arrangements are confirmed for each project.
Which parts of the panel can be customized?
Colors, aluminum skin thickness from 0.3-1.2 mm, panel length, and project coordination details can be customized. Colors can follow RAL codes or a customer-supplied physical sample.
How quickly can GMiSU prepare samples and bulk orders?
Samples can normally be prepared within 3 working days. Typical bulk production lead time is 7-15 working days after order details are confirmed.
How can buyers inspect an order before shipment?
A live video-call inspection can be arranged before shipment. Additional inspection methods can be discussed and recorded in the order agreement.
Start your project
Tell us what you need to build.
Share your product type, dimensions, color, quantity, drawings, destination market, and target schedule with Levi Leung.